Bear Scan 16

The TSGC Bear Scan 16 is an economical and reliable bearing temperature monitor which is continuously online to alert management of potential problems with overheated bearings and misaligned leg belts.

The Bear Scan 16 monitors from 1 to 16 points using thermostats with pre-selected temperatures. (Examples: 150 and 180 degrees). When the individual thermostat's pre-selected temperature is reached, the Bear Scan monitor will instantly set off an audible alarm, and the corresponding lamp will light up on the display panel indicating the exact problem point. This alarm will remain activated until the problem point has cooled sufficiently to close the thermostat. If a thermostat or a wire connecting the thermostat to the monitor is broken, the system will alarm in the same manner.

The Bear Scan 16, powered by 120V AC, comes standard with internal contacts for additional alarms and is wired in series for easy user installation, if so desired.

	Size: 11.5"H x 9.5"W x 5.0"D
	Power Requirements 120V AC
	Sensors: Hermetically-sealed thermostats (U.L. & CSA approved)
	External Alarm Hookup: Standard 1-SPDT 3 amp contact

View the Manual

Meets OSHA requirements. Built-in test circuit. NEMA 4X enclosure